[Kovove materialy - Metallic materials]
    Sat - November 02, 2024 - 15:46 No. of hits : 1795557 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 50 (2012), Issue 2

Shear strength and fracture characteristics near the interface of diffusion bonding of Fe3Al/Q235 dissimilar materials
LI, Y., WANG J., MA, H.
vol. 50 (2012), no. 2, pp. 83 - 88
DOI: 10.4149/km_2012_2_83

Abstract
In this study, Fe3Al intermetallic and Q235 steel were jointed by the vacuum diffusion bonding. The shear strength of the Fe3Al/Q235 interface was analyzed and the interfacial fracture morphology was observed by means of scanning electronic microscope (SEM). The experimental results indicated that the fracture location was on the Fe3Al side, and the shear rupture morphology was the cleavage characteristics with little toughness fracture. Most micro-cracks propagated along the interface near the Fe3Al side and sometimes leaned to the center of the interface. The Fe3Al/Q235 diffusion bonding joint with excellent interface combination and the sufficient shear strength (112 MPa) can be obtained when the heating temperature was 1060 °C, the holding time was 45-60 min and the pressure was 12-15 MPa.

Key words
diffusion bonding, interface, shear strength, fracture morphology

[open article.pdf] Full text (383 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2024-07-25 13:22      
Articles in press revised: 2024-10-31 09:35     
Full text pdf uploaded: 2024-07-25 13:23    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024