[Kovove materialy - Metallic materials]
    Mon - November 11, 2024 - 01:33 No. of hits : 1797363 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 50 (2012), Issue 1

Fretting behaviour of 316L stainless steel produced by powder injection moulding
BAKAN, H. I., CELIS, J. P.
vol. 50 (2012), no. 1, pp. 33 - 38
DOI: 10.4149/km_2012_1_33

Abstract
The biocompatible metals made available for powder injection moulding (PIM) are increasing, and as a result, the PIM process is becoming attractive for manufacturers of medical implants and surgical instruments. In addition, friction and wear properties play an important role in biomaterial applications. This study aimed to systematically investigate the fretting wear properties of 316L stainless steel parts produced by PIM under dry contact conditions. The fretting experiments were performed under gross – slip regime. The influence of a number of fretting test parameters on the friction and wear behaviour was investigated, as the contact frequency, the normal load, and number of reciprocating sliding cycles. Fretting tests were performed against corundum counter bodies. After the tests, the wear scars were examined by laser surface profilometry, scanning electron microscopy (SEM) and energy dispersive X-Ray microanalysis. The results indicate that wear occurred predominantly by abrasion, plastic deformation, and cracking.

Key words
fretting, stainless steel, powder injection moulding, biomaterials

[open article.pdf] Full text (414 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2024-11-05 11:34      
Articles in press revised: 2024-11-07 13:33     
Full text pdf uploaded: 2024-11-06 09:09    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024