[Kovove materialy - Metallic materials]
    Sat - December 03, 2022 - 20:20 No. of hits : 1407383 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 42 (2004), Issue 1

Mechanical properties of Si3N4/SiC nanocomposites measured by instrumented indentation with sphere (in Slovak)
vol. 42 (2004), no. 1, pp. 51 - 62

Contact deformation behaviour and mechanical properties of two Si3N4/SiC nanocomposites were investigated by nanoindentation with spherical diamond indenter (radius 5 µm) at low loads (1-300 mN) using depth sensing techniques. From the measurement of the tip displacement depending on the load and the tip geometry, the total and the remnant depth of penetration were found. Based on the results, we were able to study elastic and plastic behaviour. Using the method of partial unloading, the contact stress-strain curves, hardness, and modulus of elasticity were explored. The results were compared to the values obtained by the same method for the reference monolithic Si3N4 material. It has been shown that introducing SiC particles contributed to increase of hardness and elastic modulus. Also, it has been shown that the material, prepared by a new low-cost method, exhibited the best mechanical properties.

Key words
nanocomposites, mechanical properties, Si3N4, SiC, spherical indenters

Full text not available

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.7.5      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.

Article abstracts updated: 2022-11-10 06:55      
Articles in press revised: 2022-12-01 12:33     
Full text pdf uploaded: 2022-04-21 16:28    
Information updated: 2020-06-29 17:09   
Code last revised: 2020-06-29 16:48  

© OldSoft, 2004, …, 2022