[Kovove materialy - Metallic materials]
    Thu - November 07, 2024 - 21:18 No. of hits : 1796836 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 40 (2002), Issue 1

Creep behaviour of cast Ni-Cr-W-C alloys (in Czech)
SKLENICKA, V., KUDRMAN, J., KUCHAROVA, K., DANEK, R., HRBACEK, K.
vol. 40 (2002), no. 1, pp. 11 - 23

Abstract
In this paper the creep behaviour of two model cast Ni-Cr-W-C alloys with different contents of Cr, W and Fe was investigated. Uniaxial tensile creep tests were carried out at temperatures from 1023 to 1273 K and at the applied stress ranged from 20 to 250 MPa. A comparison between the creep characteristics of the two model alloys under comparable creep conditions shows that solid solution strengthening is strongly dependent on the tungsten content for temperatures up to 1173 K. By contrast, no substantial effect of a different content of W on the creep rate and the creep life was found for temperatures above 1273 K when an intensive precipitation of secondary tungsten carbides occurred.

Key words
cast nickel superalloys, high temperature creep, creep rate, creep lifetime, solid solution strengthening, precipitation strengthening

Full text not available

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2024-11-05 11:34      
Articles in press revised: 2024-11-07 13:33     
Full text pdf uploaded: 2024-11-06 09:09    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024