[Kovove materialy - Metallic materials]
    Thu - March 28, 2024 - 21:07 No. of hits : 1736485 ISSN 1338-4252 (online) ISSN 0023-432X (printed)
© Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovak Republic

VOLUME 49 (2011), Issue 6

Effect of fabrication processing on the deformation behaviour of AZ31 magnesium alloys
LUKAC, P., BALIK, J., TROJANOVA, Z.
vol. 49 (2011), no. 6, pp. 385 - 391

Abstract
The influence of two fabrication techniques – cast and rolling – on the deformation behaviour of Mg-3Al-1Zn (AZ31) alloys was investigated. The tensile tests were conducted over a wide temperature range of 25 and 300 °C at a constant strain rate. The rolled (textured) samples exhibit a strong basal texture – the flow stress depends on the orientation of the tensile to the rolling direction. It is shown that the deformation behaviour of AZ31 alloy polycrystals depends on their microstructure produced by processing and temperature. The values of the yield stress, flow stress and maximum stress of the AZ31 sheets are significantly higher than those of the AZ31 cast alloy if samples are deformed at room temperature, whereas the difference in the stress values for both types of samples is insignificant if deformed at 300 °C. The plots of the strain hardening rate against flow stress for the AZ31 sheets indicate interactions between basal and non-basal dislocations. The values of internal stress decrease with increasing deformation temperature, which indicates that recovery processes play an important role during deformation at higher temperatures. The activity of two deformation mechanisms is considered: (a) interaction between dislocations moving in basal and non-basal slip systems producing sessile and glide dislocations, which leads to hardening and (b) cross slip of dislocations through prismatic planes causing softening.

Key words
magnesium alloys, AZ31, dislocation motion, mechanical properties

[open article.pdf] Full text (289 KB)

[IMMS SAS]      UMMS SAV - Bratislava (SK) Personal data Protection   ver. 1.8.0      [go to HOME PAGE]
Full title of this journal is bilingual: Kovové materiály - Metallic Materials.
The official abbreviation in accordance with JCR ISI is Kovove Mater.


Article abstracts updated: 2023-10-26 07:45      
Articles in press revised: 2024-03-26 11:42     
Full text pdf uploaded: 2023-11-08 06:53    
Information updated: 2023-04-19 16:14   
Code last revised: 2024-03-06 11:13  

© OldSoft, 2004, …, 2024